CFWXM - TT-3-489G ALKYD GLOSS ENAMEL

  • MSDS: CFWXM
  • Manufacturer: DEL PAINT CORP
  • Product Name: TT-3-489G ALKYD GLOSS ENAMEL
  • National Stock Number: 8010-00-598-2364
Product Identification

Product ID:TT-3-489G ALKYD GLOSS ENAMEL
MSDS Date:11/04/1997
FSC:8010
NIIN:00-598-2364
MSDS Number: CFWXM

Responsible Party
DEL PAINT CORP.
3105 E. RENO
OKLAHOMA CITY, OK 73117
US

Emergency Phone: 800-424-9300 24 HRS

Info Phone: 405-672-1431/FAX 405-672-0804

Preparer: ONEY FLEMING

Cage: JO954

Contractor
DEL PAINT MFG
OKLAHOMA CITY, OK 73117 US

Telephone: 405-672-1431

Cage: 39934

Ingredients

PETROLEUM HYDROCARBON

CAS: 8052-41-3

RTECS: WJ8925000

Fraction By Weight: 41.33%

OSHA PEL 400 PPM


NON-HAZARDOUS MATERIAL

Fraction By Weight: 58.67%

OSHA PEL NOT RELEVANT

ACGIH TLV: NOT RELEVANT


VOC = 3.99 LBS/GL

RTECS: 9999999VO

OSHA PEL NOT RELEVANT

ACGIH TLV: NOT RELEVANT

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE: IRRITATION, REDNESS, TEARING,
BLURRED VISION, PAIN. SKIN: IRRITATION, DEFATTING, DERMATITIS,
REDNESS. INHAL: NAUSEA, RESPIRATORY IRRITATION, DIZZY, NAUSEA,
HEADACHE, LABORED BREATHING. INGEST: GI IRRITATION, NAUSEA,
VOMITING, ABDOMINAL PAIN.
Medical Cond Aggravated by Exposure:RESPIRATORY DISORDERS.

First Aid

First Aid:EYE: FLUSH W/LARGE AMOUNTS OF WATER FOR 15 MINUTES, LIFT
LIDS. GET MED AID. SKIN: REMOVE CONTAM CLOTHES. WASH W/SOAP &
WATER. INHAL: GET FRESH AIR. GIVE OXYGEN. GET MED AID. INGEST: KEEP
WARM/QUIET. G ET MED AID. DONT INDUCE VOMIT.

Fire Fighting

Flash Point Method:TCC
Flash Point:105F,41C
Lower Limits:0.07
Upper Limits:6.0
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM, WATER SPRAY.
Fire Fighting Procedures:SCBA, PROTECTIVE GEAR. ONLY USE WATER SPRAY TO
COOL CONTAINERS.
Unusual Fire/Explosion Hazard:VAPORS >AIR. MAY BE IGNITED BY PILOT
LIGHT OR OTHER FLAMES.

Accidental Release

Spill Release Procedures:VENTILATE AREA. COVER SPILL W/INERT ABSORBENT.
SHOVEL W/NONSPARKING TOOLS INTO CONTAINER.
Neutralizing Agent:NONE

Handling

Handling and Storage Precautions:STORE IN A CLEAN, DRY AREA. KEEP AWAY
FROM IGNITS. KEEP OUT OF REACH OF CHILDREN. KEEP CONTAINERS CLOSED
WHEN NOT IN USE.

Exposure Controls

Respiratory Protection:USE CARTRIDGE RESPIRATOR (NIOSH APPROVED).
Ventilation:LOCAL EXHAUST.
Protective Gloves:CHEMICAL RESISTANT.
Eye Protection:SAFETY GLASSES W/SIDE SHIELDS.
Other Protective Equipment:EYEWASH STATION, IMPERVIOUS CLOTHES.
Supplemental Safety and Health
NK

Chemical Properties

Boiling Pt:B.P. Text:300 TO 415F
Decomp Temp:Decomp Text:752F,400C
Vapor Pres:3.4 MM
Vapor Density:>AIR
Spec Gravity:1.12
pH:NA
Viscosity:67-77 KU
Evaporation Rate & Reference:Solubility in Water:INSOLUBLE.
Appearance and Odor:GRAY LIQUID, W/SOLVENT ODOR.
Percent Volatiles by Volume:62.06
Corrosion Rate:NA

Stability

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT W/STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:DONT STORE NEAR IGNITION SOURCES.
Hazardous Decomposition Products:CARBON DIOXIDE

Disposal

Waste Disposal Methods:IN ACCORDANCE W/FEDERAL, STATE & LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.